Missed Rivets

There were 2 places that rivets were not called for in the plans.  The first one is at the top of the tailcone on F-01407 and F-14131, which I checked with Van’s and they said I could go ahead and rivet the two pieces together.  Then the bell crank ribs, F01429R&L where they attach to F-01407.  I was able to squeeze the top two, but the bottom one is impossible to get to with the squeezer.  I have a call into Van’s to see if I can use a LP4-3 in it’s place.

IMG_3766

IMG_3765